Shearer cable splintThere are five models: LJ-U, LSA-HB, LJ-HC, LJ-O, and LJ-H, totaling 18 specifications. Can be customized according to different sizes of users! To ensure the discharge effect of cables and water pipes! This product can be widely used in the towing device that constitutes the drum shearer to tow and protect the power supply cable and the water inlet pipe.

basic product info:

1. Appearance

The surface of the cable clamp plate should be smooth and flat, and the surface covered with non-metallic materials should not expose the steel plate. After the cable clamps are connected in series, they should rotate flexibly and bend freely, and the bending angle should meet the requirements of technical drawings.

2. Basic size

The geometric dimensions of the cable clamp plate should meet the requirements of the processing drawings, the hole diameter tolerance is H13 (GB/T 1800.4-1999), the hole pitch deviation is GB/T 1804-f (GB/T 1804-1992), the size of H, A The tolerance is MT4 level (GB/T 14486-2008), and the remaining dimensional tolerances are manufactured according to the unmarked dimensional tolerance MT5 level (GB/T 14486-2008).

3. Tensile strength

Cable clamp pressDuring the test specified in 7.4 of MT/T117-2007, its tensile strength should reachSpecified working load, keep2min, there should be no residual deformation, cracking, or falling off during unloading inspection.

4, Impact resistance

When the cable clamp is tested in accordance with MT/T117-2007 7.6, it should be able to withstand the smash-resistant impact energy that meets the requirements, and the cable clamp should not be broken after the impact.